Oct 03, 2023 
Support Center » Knowledgebase » 3CX Windows IP PBX » Create Custom Gateway Template
 Create Custom Gateway Template
Solution This article applies to 3CX 8.x or higher and references Patton 4114 Gateway as an example.

Open the 3CX admin, select Settings, Provisioning templates, Gateway, Patton 4114, Edit

Find this section

<!-- Hostnames and Port Numbers -->
<field name="RegistrarHost"></field>
<field name="RegistrarPort">5060</field>
<field name="NumberOfLines" status="readonly">4</field>
<field name="TypeOfLines" status="readonly">Analog</field>

Change this line from <field name="NumberOfLines" status="readonly">4</field>


<field name="NumberOfLines">1</field>

Click Apply and you will be prompted to save. A dialog will appear and enter the new file and template name for the custom device.. Example:

Patton SN-4114 1-port FXO (CUSTOM)

Create the gateway using the custom template.

Article Details
Article ID: 699
Created On: Dec 18, 2009 02:03 PM

 This answer was helpful  This answer was not helpful

 Login [Lost Password] 
Remember Me:
 Article Options
Home | Register | Submit a Ticket | Knowledgebase | News | Downloads